Dura Rely-A-Soft Instructions

Public Channel / Instructions

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. For Product Updates & Information, sign up at reliancedental.net/contact/updates Front Back A resilient soft cushion long-term reline Non-methyl methacrylate Creates a permanent bond High color stability DuraRely-A-Soft Instruction sheet FLAT SIZE: 8.5w x 6.5h FOLDED SIZE 4.25w x 6.5h 4 pages– center fold 9. When curing , if a fl ask is being used, do not trial pack the so ft liner. Slowly, close the fl ask completely by applying pressure, and place in a curing unit fi lled with boiling water (212° F /100° C) for at least 20 minutes. 10. If using a jig, put jig into a curing unit with hot water (130°-160° F / 55°-71° C) for 15 minutes. 11. A ft er curing, place denture in cold water to temporarily harden the so ft liner for easy trimming. 12. Remove excess fl ash with sharp blade or scissors. An acrylic bur can be used to taper the liner onto the labial and buccal surfaces. 13. Completely dry the liner, then apply sealer on the so ft liner and air dry for 2 minutes. Add a second coat of sealer. It is recommended that sealer be re-applied every 6 months. PAT I E N T C A R E 1. Only use a so ft bristle brush when cleaning denture. 2. Soak denture for no more than 10 minutes in cleaning solution. THE COMPLETE PACKAGE: 4 oz. Powder (pink or clear); 4 oz. Liquid; 1 oz. Sealer; Measures & Mixing Cup Reliance Dental Manufacturing, LLC s 5805 W. 117th Place s Alsip, IL 60803 European Representative: Richard L. Milano Via Tiepolo 10126 Torino, Italy FOR CHAIRSIDE OR LABORATORY USE

3. For Product Updates & Information, sign up at reliancedental.net/contact/updates Front Back A resilient soft cushion long-term reline Non-methyl methacrylate Creates a permanent bond High color stability DuraRely-A-Soft Instruction sheet FLAT SIZE: 8.5w x 6.5h FOLDED SIZE 4.25w x 6.5h 4 pages– center fold 9. When curing , if a fl ask is being used, do not trial pack the so ft liner. Slowly, close the fl ask completely by applying pressure, and place in a curing unit fi lled with boiling water (212° F /100° C) for at least 20 minutes. 10. If using a jig, put jig into a curing unit with hot water (130°-160° F / 55°-71° C) for 15 minutes. 11. A ft er curing, place denture in cold water to temporarily harden the so ft liner for easy trimming. 12. Remove excess fl ash with sharp blade or scissors. An acrylic bur can be used to taper the liner onto the labial and buccal surfaces. 13. Completely dry the liner, then apply sealer on the so ft liner and air dry for 2 minutes. Add a second coat of sealer. It is recommended that sealer be re-applied every 6 months. PAT I E N T C A R E 1. Only use a so ft bristle brush when cleaning denture. 2. Soak denture for no more than 10 minutes in cleaning solution. THE COMPLETE PACKAGE: 4 oz. Powder (pink or clear); 4 oz. Liquid; 1 oz. Sealer; Measures & Mixing Cup Reliance Dental Manufacturing, LLC s 5805 W. 117th Place s Alsip, IL 60803 European Representative: Richard L. Milano Via Tiepolo 10126 Torino, Italy FOR CHAIRSIDE OR LABORATORY USE

2. For Product Updates & Information, sign up at reliancedental.net/contact/updates Inside Right Inside Left DuraRely-A-Soft Instruction sheet FLAT SIZE: 8.5w x 6.5h FOLDED SIZE 4.25w x 6.5h 4 pages– center fold CHAIRSIDE TECHNIQUE 1. Clean and roughen denture area to be rebased. Dry denture completely. 2. Lubricate the labial and buccal surfaces within 1/8" of the peripheral border. 3. Recommended powder/liquid proportions: Powder 8 ml -large plastic vial Liquid 5 ml -small plastic vial Add powder to liquid in mixing cup and stir slowly and thoroughly for approximately for 15 seconds. Let mixture stand 1 minute. 4. Apply mixture to denture. 5. Insert denture in mouth and have patient close mouth lightly into occlusion, muscle-trim the borders, then remove the denture. 6. Place the denture, reline side up, into a container fi lled with hot water (130°-160° F / 55°-71° C), and cure for 10 minutes. For best cure, place in a pressure pot in hot water. 7. A ft er curing, place denture in cold water to temporarily harden the so ft liner for easy trimming. 8. Remove excess fl ash with sharp blade or scissors. An acrylic bur can be used to taper the materials onto the labial and buccal surfaces. 9. Completely dry the liner, then apply sealer on the so ft liner and air dry for 2 minutes. Add a second coat of sealer. 10. When sealer is completely dry, place denture in patient’s mouth. * It is recommended that sealer be reapplied every 6 months. PAT I E N T C A R E • Only use a so ft bristle brush when cleaning denture. • Soak denture for no more than 10 minutes. LABORATORY TECHNIQUE PR EPAR ATION 1. Pour a stone model of reline impression. Flask or Jig the model with impression in place, following standard reline procedures. 2. A ft er fl ask has stood for one hour, place fl ask in boil out tank for 15 minutes. Remove and separate upper and lower portions. 3. Clean lower half of fl ask with a mild detergent, followed with a hot water rinse. Apply separator and allow to dry. 4. Relieve the denture base tissue-bearing surface by approximately 2 mm to accommodate the so ft liner. So ft liner can extend above peripheral roll. 5. Roughen area of denture base to be relined and eliminate any severe undercuts. 6. Repeat cleansing of upper half of the fl ask and rinse with hot water, apply separator and let dry. APPLICATION AND CURING 7. Recommended powder/liquid proportions: Powder 8 ml -large plastic vial Liquid 5 ml -small plastic vial - if so ft er liner is desired, more liquid can be added to mixture - if fi rmer liner is desired, more powder can be added to mixture Add powder to liquid in mixing cup and stir slowly and thoroughly for approximately for 15 seconds. Let mixture stand 1 minute. 8. Apply and spread mixture onto the dry denture base surface. Close the fl ask or jig for curing. If jig is used, apply fi ngertip coated with the mixing liquid to taper and smooth excess material onto labial and buccal surfaces. Follow these instructions for outstanding results.

Views

  • 668 Total Views
  • 502 Website Views
  • 166 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 3

  • 76 www.reliancedental.net
  • 1 www.google.ca
  • 4 translate.googleusercontent.com