RD_InstructionSheet_DuraSplint_4Website

Public Channel / Instructions

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

1. For Product Updates & Information, sign up at reliancedental.net/contact/updates Front DuraSplint Instruction sheet FLAT SIZE: 4.25w x 6.5h 2 pages (2-sided) Self-adjusting permitting closest fit Reduces post-operative chair time Dimensionally stable No methyl methacrylate FLEXIBLE NIGHTGUARD RESIN DuraSplin t

2. Back Reliance Dental Manufacturing, LLC • 5805 W. 117th Place • Alsip, IL 60803 DuraSplint Instruction sheet FLAT SIZE: 4.25w x 6.5h 2 pages (2-sided) DuraSplint Instruction sheet FLAT SIZE: 4.25w x 6.5h 2 pages (2-sided) FLEXIBLE NIGHTGUARD RESIN DuraSplin t INSTRUCTIONS PRESS PACKING METHOD 1. Prepare stone/plaster mold for press packing nightguard. 2. Measure 1/2 oz. liquid (clear scoop) and add to 1 oz. powder (red scoop) in mixing bowl, and mix slowly (not creating bubbles) but thoroughly for 10 seconds. Ratio: one (1) part liquid to two (2) parts powder. 3. Once the mix reaches a doughy state (5-6 minutes), pack into nightguard mold using normal press packing procedures. 4. Immerse for 1 hour in 127º F / 53º C water. DO NOT cure at temperature above 127º F / 53º or mix will not cure properly. 5. Cool for 15 minutes under cool running tap water before removing night - guard from mold. 6. Briefly place appliance in warm tap water before inserting into mouth or back on model for a better fit. POURING METHOD 1. Prepare hydrocolloid mold in pour flask in regular manner. 2. Measure 1/2 oz. liquid (clear scoop) and add to 1 oz. powder (red scoop) in mixing bowl, and mix slowly (not creating bubbles) but thoroughly for 10 seconds. Ratio: one (1) part liquid to two (2) parts powder. 3. Immerse pour flask in pressure pot for 45 minutes in 125º-126º F / 52º C water at 20 psi /2 bars. DO NOT cure at temperature above 127º F / 53º C or mix will not cure properly. 4. Remove pour flask in pressure pot and place under cold running tap water for 15 minutes before removing nightguard from hydrocolloid mold. 5. Briefly place appliance in warm tap water before inserting into mouth or back on model for a better fit. REPAIRS: Repair DuraSplint by using the original material and follow steps 4 & 5 of the press pack method instruction or by using a fast cure acrylic.

Views

  • 162 Total Views
  • 117 Website Views
  • 45 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 6 www.reliancedental.net