SDS DuraSplint Liquid

Public Channel / SDS

Share on Social Networks

Share Link

Use permanent link to share in social media

Share with a friend

Please login to send this document by email!

Embed in your website

Select page to start with

Post comment with email address (confirmation of email is required in order to publish comment on website) or please login to post comment

7. _ __________________________________________________________________________________________________________ SDS for: DuraS plint (Liquid Component) Page 7 of 7 The information and recommendations contained herein are based upon data believed to be correct. However, no guarantee or warranty of any kind, expressed or implied, is made with respect to the information contained herein. We accept no responsib ility and disclaim all liability for any harmful effects which may be caused by exposure to our products. Customer/users of this product must comply with all applicable health and safety laws, regulations, and orders. The full text of the phrases appearing in section 3 is: H315 Causes skin irritation. H319 Causes serious eye irritation. H335 May cause respiratory irritation. This is the first version in the GHS SDS format. Listings of changes from previous versions in other formats are not applicable.

2. _ __________________________________________________________________________________________________________ SDS for: DuraS plint (Liquid Component) Page 2 of 7 This product contains the following substances that present a hazard within the meaning of the relevant State and Federal Haz ardous Substances regulations. Ingredient/Chemical Designations Weight % GHS Classification Notes 2 - Ethoxyethyl Methacrylate CAS Number: 0002370 - 63 - 0 75 – 100 Skin Irrit. 2;H315 Eye Irrit. 2;H319 [1] In accordance with paragraph (i) of §1910.1200, the specific chemical identity and/or exact percentage (concentration) of composition has been withheld as a trade secret. [1] Substance classified with a health or environmental hazard. [2] Substance with a workplace exposure limit. [3] PBT - substance or vPvB - substance. *The full texts of the phrases are shown in Section 16. Description of first aid measures General: In all cases of doubt, or when symptoms persist, seek medical attention. Never give anything by mouth to an unconscious person. Inhalation: Remove to fresh air, keep patient warm and at rest. If breathing is irregular or stopped, give artificial respiration. If unconscious place in the recovery position and obtain immediate medical attention. Give nothing by mouth. May cause nausea. Eyes: Irrigate copiously with clean water for at least 15 minutes, holding the eyelids apart and seek medical attention. Skin: Remove contaminated clothing. Wash skin thoroughly with soap and water or use a recognized skin cleanser. Ingestion: If swallowed obtain immediate medica l attention. Keep at rest. Induce vomiting. May cause nausea. Most important symptoms and effects, both acute and delayed Overview: No specific symptom data available. See section 2 for further details. Eyes: Causes serious eye irritation. Skin: May ca use skin irritation. Extinguishing Media: Recommended extinguishing media; alcohol resistant foam, CO 2 , powder, water spray. Do not use: Water Jet Special hazard arising from the substance or mixture: Hazardous decomposition: No hazardous decom position data available. Keep away from heat / sparks / open flames / hot surfaces – No smoking. Advice for Fire - Fighters: Sealed container exposed to elevated temperatures may rupture explosively due to polyme rization. Vapors are heavier than air and may travel to ignition source. Cool closed containers exposed to fire by spraying them with water. Do not allow run off water and contaminants from fire fi ghting to enter drains or water ways. ERG Guide No. ---- 3. COMPOSITION/INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES 5. FIRE - FIGHTING MEASURES

3. _ __________________________________________________________________________________________________________ SDS for: DuraS plint (Liquid Component) Page 3 of 7 Personal precautions, protective equipment and emergency procedures : Put on appropriate personal protective equipment (see section 8). Environmental Precautions: Do not allow spills to enter drains or waterways. Use good personal hygiene practices. Wash hands before eating, drinking, smoking, or using toilet. Promptly remove soiled clothing and wash thoroughly before reuse. Incinerate liquid in proper equipment. Methods and Material for Containment and Cleaning up: For high vapor concentration, evacuate area, eliminate all sources of ignition, absorb spills with inert material, transfer to a suitable container for disposal. Precautions for Safe Handling: Store in accordance with the National Fire Protection Accociate’s publication NFPA 30, Flammable and Combustible Liquids Code, 29 CFR 1910.106 applies to the handling, storage, and use flammable and combustible liquids. See section 2 for further details. – [Prevention]: Conditions for Safe Storage, including and incompatibilities : Handle c ontainers carefully to prevent damage and spillage. Store in a cool dry area, away from heat, sparks and open flame. Keep container s sealed when not in use. Store out of direct sunlight. Incompatible materials: Reducing and oxidizing agents. May soften paint and rubbery surfaces. See section 2 for further details. – [Storage]: Specific end use(s) No data available. Control Parameters : Exposure CAS No. Ingredient Source Value 0002370 - 63 - 0 2 - Ethoxyethyl Methacrylate OSHA No Established Limit ACGIH No Established Limit NIOSH No Established Limit Supplier No Established Limit Carcinogen Data CAS No. Ingredient Source Value 0002370 - 63 - 0 2 - Ethoxyethyl Methacrylate OSHA Select Carcinogen : No NTP Known: No; Suspected: No IARC Group 1: No: Group 2 a: No; Group 2b: No; Group 3: No ; Group 4: No Exposure Controls Respiratory: If workers are exposed to concentrations a bove 10ppm they must use a self - contained breathing apparatus. Eyes: Protective safety glasses recommended. Skin: 6. ACCIDENTAL RELEASE MEASURES 7. HANDLING AND STORAGE 8. EXPOSURE CONTROLS AND PERSONAL PROTECTION

5. _ __________________________________________________________________________________________________________ SDS for: DuraS plint (Liquid Component) Page 5 of 7 Acute Toxicity Ingredient Oral LD50 mg/kg Skin LD50 Mg/kg Inhalation Vapor LC50 Mg/L/4hr Inhalation Dust/Mist LC50 mg/L/4hr Inhalation Gas LC50 ppm 2 - Ethoxye thyl Methacrylate No data a vailable No data a vailable No data a vailable No data a vailable No data a vailable Note: When no route specific LD50 data is available for an acute toxin, the converted acute toxicity point estimate was used in the calculation of the product’ s ATE (A cute Toxicity Estimate). Classification Category Hazard Description Acute toxicity (oral) --- Not applicable Acute toxicity (dermal ) --- Not applicable Acute toxicity ( inhalation) --- Not applicable Skin corrosion/irritation 2 Causes skin irritation. Serious eye damage/irritation 2 Causes serious eye irritation. Respiratory sensitization --- Not applicable Skin sensitization --- Not applicable Germ cell mutagenicity --- Not applicable Carcinogenicity --- Not applicable STOT - single exposure --- Not applicable STOT - repeated exposure --- Not applicable Aspiration hazard --- Not applicable Toxicity: No additional information provided for this product. See section 3 for chemical specific data. Aquatic Ecotoxicity Ingredient 96 hr LC50 fish, Mg/l 48 hr EC50 crustacea, Mg/l ErC50 algae, Mg/l 2 - Ethoxye thyl Methacrylate (0002370 - 63 - 0) Not Available Not Available Not Available Persisten ce and Degradability There is no data available on the preparation itself. Bioaccumulative p otential Not Measured Mobility in soil No data available Results of PBT and vPvB assessment This product contains no PBT/vPvB chemicals. Other adverse effects No data available Waste treatment methods: Observe all federal, state and local regulations when disposing of this substance. 11. TOXICOLOGICAL INFORMATION 12. ECOLOGICAL INFORMATION 13. DISPOSAL CONSIDERATIONS

6. _ __________________________________________________________________________________________________________ SDS for: DuraS plint (Liquid Component) Page 6 of 7 DOT (Domestic Surface IMO / IMDG (Ocean ICAO/IATA Transportation) Transportation) UN Number Not applicable Not Regulated Not Regulated UN proper shipping Not Regulated Not Regulated Not Regulated Transport Hazard DOT Hazard Class: Not IMDG: Not Applicable Air Class: Not Class(es) Applicable Sub class: Not applicable Applicable Packing Group Not Applicable Not Applicable Not Applicable Environmental Hazards: IMDG Marine Pollutant: No Special precautions for user: No further information Regulatory Overview: The regulatory data in Section 15 is not intended to be all - inclusive, only selected regulations are represented. Toxic Substance Control Act (TSCA) : All components of this material are either listed or exempt from listing on the TSCA inventory. WHMIS Classification: B3 D2B US EPA Tier II Hazards: - Fire: Yes - Sudden Release of Pressure: No - Reactive: No - Immediate (Acute): Yes - Delayed (Chronic): No EPCR A 311/312 Chemicals and RQs : To the best of our knowledge, there are no chemicals at levels which require reporting under this statute. EPCRA 302 Extremely Hazardous: To the best of our knowledge, ther e are no chemicals at levels which require reporting under this statute. EPCRA 313 Toxic Chemicals: Ethyl Methacrylate Proposition 65 – Carcinogens (>0.0%): To the best of our knowledge, there are no chemicals at levels which require reporting under this statute. Proposition 65 – Developmental Toxins (>0.0%): To the best of our knowledge, there are no chemicals at levels which require reporting under this statute. Proposition 65 – Female Repro Toxins (>0.0%): To the best of our knowledge, there are no chem icals at levels which require reporting under this statute. Proposition 65 – Male Repro Toxins (>0.0%): To the best of our knowledge, there are no chemicals at levels which require reporting under this statute. New Jersey RTK Substances (>1%): To the best of our knowledge, there are no chemicals at levels which require reporting under this statute. Pennsylvania RTK Substances (>1%): To the best of our knowledge, there are no chemicals at levels which require reporting under this statute. Hazardous Material Information System (HMIS) National Fire Protection Association (NFPA) 14. TRANSPORT INFORMATION 15. REGULATORY INFORMATION 16. OTHER INFO RMATION

4. _ __________________________________________________________________________________________________________ SDS for: DuraS plint (Liquid Component) Page 4 of 7 Wear overalls to keep skin contact to a minimum. Wear impervious, neoprene type protective gl oves. Engineering Controls: Provide adequate ventilation. Where reasonably practicable this should be achieved by the use of local exhaust ventilation and good general extraction. If these are not sufficient to maintain concentrations of particulates and any vapor below occupational exposure limits suitable respirato ry protection must be worn. An eyewash fountain should be located in areas where the product is used. Other Work Practices: Use good personal hygiene practices. Wash hands before eating, drinking, smoking or using toilet. Promptly remove soiled cl othing and wash thoroughly before reuse. S ee section 2 for further details. – [Prevention]: Appearance Clear, pale yellow Liquid Odor Mild Odor Threshold Not Measured pH Not Measured Melting Point / Freezing Point Not Measured Initial boiling point and boiling range 92°C Flash Point 71°C Evaporation Rate (Ether=1) Not Measured Flammability (solid, gas) Not Applicable Upper/lower Flammability or Explosive Limits Lower Explosive Limit: Not Measured Upper Explosive Limit: Not Measured Vapor Pressure (Pa) 7 mm Hg at 160°C Vapor Density 1 (air=1) Specific Gravity 1. 005 Solubility in Water Negligible Partition coefficient n - octanol/water (Log Kow) Not Measured Auto - Ignition Tempe rature Not Measured Decomposition Temperature Not Measured Viscosity (cSt) Not Measured Other Information : No other relevant information Reactivity Hazardous Polymerization mat occur Chemical stability Stable under normal circumstances Possibility of hazardous reactions No data available Conditions to avoid Heat and/or ignition source. Incompatible materials Reducing and oxidizing agents. May soften paint and rubbery surfaces. Hazardous decomposition products No hazardous decomposition data available. 9. PHYSICAL AND CHEMICAL PROPERTIES 10. STABILITY AND REACTIVITY

1. SAFETY DATA SHEET Issue Date 2017 - 04 - 23 Revision Date 2017 - 04 - 23 Revision: R0 _ __________________________________________________________________________________________________________ SDS for: DuraS plint (Liquid Component) Page 1 of 7 Product Identifiers Product Name: DuraSplint (Liquid Component) Alternate Name: DuraS plint Details of the Supplier of the Safety Data Sheet Company Name: Reliance Dental Manufacturing, LLC Supplier Address : 5805 W. 117th Place Alsip, IL 60803 (USA) Email: service@ reliance dental. net Emergency Telephone Numbers Company Phone Number: 708 - 597 - 6694 (During Business Hours, 8:00am – 4:00pm CST) Emergency Telephone: Infotrac: 800 - 535 - 5053 Classification of the Substance or Mixture Skin Irrit ation/corrosion 2;H315 Causes skin irritation Eye Irrit ation/damage 2;H319 Causes serious eye irritation Label Elements Using the Toxicity Data listed in section 11 and 12 the product is labeled as follows. Warning Hazards Statements H227 H315 H319 H335 Precautionary Statements – Prevention, Response, Disposal P210 P264 P280 P302+P352 P305+P351 +P338 P321 P332 +P313 P337+P313 P362 P403+235 P501 1. PRODUCT AND COMPANY IDENTIFICATION 2. HAZARDS IDENTIFICATION [Prevention] Keep away from heat / sparks / open flames / hot surfaces – No smoking. Wash thoroughly after handling. Wear protective gloves / eye protection / face protection. [Response] IF ON SKIN: Wash with plenty of soap and water. IF IN EYES: Rinse continuously with water for several minutes. Remove contact lense if present and easy to do – continue rinsing. Specific treatment (see information on this label). If skin irritation occurs: Get medical advice / attention. If eye irritation persists: Get medical advice / attention. Take off contaminated clothing and wash before reuse. [Storage] Store in a well ventilated place. Keep cool. [Disposal] Dispose of contents / container in accordance with local / federal regulations. Combustible liquid. Causes skin irritation. Causes serious eye irritation. May cause respiratory irritation.

Views

  • 146 Total Views
  • 106 Website Views
  • 40 Embeded Views

Actions

  • 0 Social Shares
  • 0 Likes
  • 0 Dislikes
  • 0 Comments

Share count

  • 0 Facebook
  • 0 Twitter
  • 0 LinkedIn
  • 0 Google+

Embeds 1

  • 12 www.reliancedental.net